Question 1

Refer to the exhibit.
Examine the FortiManager information shown in the exhibit
Which two statements about the FortiManager status are true'' (Choose two)

Accepted Answer

According to the FortiManager Administration Guide, “Central management mode allows you to manage all FortiSwitch devices from a single interface on the
FortiManager device.” Therefore, option C is true because the exhibit shows that the FortiSwitch manager is enabled and the FortiSwitch device is managed by
the FortiManager device. Option D is also true because the exhibit shows that the FortiSwitch device status is offline, which means that it is not reachable by the
FortiManager device, but it is authorized, which means that it has been added to the FortiManager device. Option A is false because per-device management
mode allows you to manage each FortiSwitch device individually from its own web-based manager or CLI, which is not the case in the exhibit. Option B is false
because the FortiSwitch device is authorized, as explained above.

Question 2

Refer to the exhibit
Examine the FortiGate RSSO configuration shown in the exhibit
FortiGate is configured to receive RADIUS accounting messages on port3 to authenticate RSSO users The users are located behind port3 and the internet link is
connected to port1 FortiGate is processing incoming RADIUS accounting messages successfully and RSSO users are getting associated with the RSSO Group
user group However all the users are able to access the internet, and the administrator wants to restrict internet access to RSSO users only
Which configuration change should the administrator make to fix the problem?

From SurePassExam
https://www.surepassexam.com/NSE7_LED-7.0-exam-dumps.html (37 New Questions)

Accepted Answer

According to the exhibit, the firewall policy from port3 to port1 has no user group specified, which means that it allows all users to access the internet. Therefore,
option B is true because adding RSSO Group to the firewall policy will restrict internet access to RSSO users only. Option A is false because changing the
RADIUS Attribute Value setting will not affect the firewall policy, but rather the RSSO user group membership. Option C is false because enabling Security Fabric
Connection on port3 will not affect the firewall policy, but rather the communication between FortiGate and other Security Fabric devices. Option D is false because
creating a second firewall policy from port3 to port1 will not affect the existing firewall policy, but rather create a redundant or conflicting policy.

Question 3

Refer to the exhibit
Wireless guest users are unable to authenticate because they are getting a certificate error while loading the captive portal login page.This URL string is the
HTTPS POST URL guest wireless users see when attempting to access the network using the web browser
Which two settings are the likely causes of the issue? (Choose two.)

Accepted Answer

According to the exhibit, the wireless guest users are getting a certificate error while loading the captive portal login page. This means that the browser cannot
verify the identity of the server that is hosting the login page. Therefore, option A is true because the external server FQDN is incorrect, which means that it does
not match the common name or subject alternative name of the server certificate. Option B is also true because the wireless user’s browser is missing a CA
certificate, which means that it does not have the root or intermediate certificate that issued the server certificate. Option C is false because the FortiGate
authentication interface address is using HTTPS, which is a secure protocol that encrypts the communication between the browser and the server. Option D is
false because the user address is not in DDNS form, which is not related to the certificate error.

Question 4

Which two pieces of information can the diagnose test authserver ldap command provide? (Choose two.)

From SurePassExam
https://www.surepassexam.com/NSE7_LED-7.0-exam-dumps.html (37 New Questions)

Accepted Answer

According to the FortiGate CLI Reference Guide, “The diagnose test authserver ldap command tests LDAP
authentication with a specific LDAP server. The command displays whether the user credentials are correct and whether the user belongs to any groups that
match a firewall policy. The command also displays the LDAP codes returned by the LDAP server.” Therefore, options B and C are true because they describe the
information that the diagnose test authserver ldap command can provide. Option A is false because the command does not display whether the admin bind user
credentials are correct, but rather whether the user credentials are correct. Option D is false because the command does not display the LDAP groups found for
the user, but rather whether the user belongs to any groups that match a firewall policy.

Question 5

Refer to the exhibit.
Examine the FortiGate configuration FortiAnalyzer logs and FortiGate widget shown in the exhibit
An administrator is testing the Security Fabric quarantine automation The administrator added FortiAnalyzer to the Security Fabric and configured an automation
stitch to automatically quarantine compromised devices The test device (::.:.:.!) s connected to a managed Fort Switch dev :e
After trying to access a malicious website from the test device, the administrator verifies that FortiAnalyzer has a log (or the test connection However the device is
not getting quarantined by FortiGate as shown in the quarantine widget
Which two scenarios are likely to cause this issue? (Choose two)

Accepted Answer

According to the exhibits, the administrator has configured an automation stitch to automatically quarantine compromised devices based on FortiAnalyzer’s threat
detection services. However, according to the FortiAnalyzer logs, the test device is not detected as compromised by FortiAnalyzer, even though it tried to access a
malicious website. Therefore, option B is true because FortiAnalyzer does not have a valid threat detection services license, which is required to enable the threat
detection services feature. Option D is also true because FortiAnalyzer does not consider the malicious website an indicator of compromise (IOC), which is a
criterion for identifying compromised devices. Option A is false because the web filtering rating service is working, as shown by the log entry that indicates that the
test device accessed a URL with a category of “Malicious Websites”. Option C is false because the device does not need to have FortiClient installed to be
quarantined by FortiGate, as long as it is connected to a managed FortiSwitch device.

Question 6

Refer to the exhibit.

From SurePassExam
https://www.surepassexam.com/NSE7_LED-7.0-exam-dumps.html (37 New Questions)
Examine the FortiSwitch security policy shown in the exhibit
If the security profile shown in the exhibit is assigned to all ports on a FortiSwitch device for 802 1X authentication which statement about the switch is correct?

Accepted Answer

According to the FortiSwitch Administration Guide, “If a device does not support 802.1X authentication, you can configure the switch to assign the device to an
onboarding VLAN. The onboarding VLAN is a separate VLAN that you can use to provide limited network access to non-802.1X devices.” Therefore, option C is
true because it describes the behavior of FortiSwitch when the security profile shown in the exhibit is assigned to all ports. Option A is false because FortiSwitch
can authenticate multiple devices connected to the same port using MAC-based or MAB-EAP modes. Option B is false because FortiSwitch will not try to
authenticate non-802.1X devices using the device MAC address as the username and password, but rather use MAC authentication bypass (MAB) or EAP passthrough modes. Option D is false because all EAP messages will be terminated on FortiGate, not FortiSwitch, when using 802.1X authentication.

Question 7

What is the purpose of enabling Windows Active Directory Domain Authentication on FortiAuthenticator?

Accepted Answer

According to the FortiAuthenticator Administration Guide2, “Windows Active Directory domain authentication enables FortiAuthenticator to join a Windows Active
Directory domain as a machine entity and proxy authentication requests using Kerberos.” Therefore, option D is true because it describes the purpose of enabling
Windows Active Directory domain authentication on FortiAuthenticator. Option A is false because FortiAuthenticator does not need Windows administrator
credentials to perform an LDAP lookup for a user search. Option B is false because FortiAuthenticator does not use a Windows CA certificate when authenticating
RADIUS users, but rather its own CA certificate. Option C is false because FortiAuthenticator does not import users from Windows AD, but rather synchronizes
them using LDAP or FSSO.

Question 8

Refer to the exhibits.
Exhibit.

From SurePassExam
https://www.surepassexam.com/NSE7_LED-7.0-exam-dumps.html (37 New Questions)
Examine the troubleshooting outputs shown in the exhibits
Users have been reporting issues with the speed of their wireless connection in a particular part of the wireless network The interface that is having issues is the 2
4 GHz interface that is currently configured on channel 6
The administrator of the wireless network has investigated and surveyed the local RF environment using the tools available at the AP and FortiGate
Which configuration would improve the wireless connection?

Accepted Answer

According to the exhibits, the AP 2.4 GHz interface is currently configured on channel 6, which is overlapping with other nearby APs on channels 4 and 8. This can
cause interference and reduce the wireless performance. Therefore, changing the AP 2.4 GHz channel to 1 would improve the wireless connection, as it would
avoid the overlapping channels and use a non-overlapping channel instead. Option A is false because changing the AP 2.4 GHz channel to 11 would still overlap
with other nearby APs on channels 9 and 13. Option C is false because changing the AP 2.4 GHz channel to 9 would still overlap with other nearby APs on
channels 6, 8, and 11. Option D is false because changing the AP 2.4 GHz channel to 13 would still overlap with other nearby APs on channels 9 and 11.

Question 9

Exhibit.
Exhibit.

From SurePassExam
https://www.surepassexam.com/NSE7_LED-7.0-exam-dumps.html (37 New Questions)
Refer to the exhibits
In the wireless configuration shown in the exhibits, an AP is deployed in a remote site and has a wireless network (VAP) called Corporate deployed to it
The network is a tunneled network however clients connecting to a wireless network require access to a local printer Clients are trying to print to a printer on the
remote site but are unable to do so
Which configuration change is required to allow clients connected to the Corporate SSID to print locally?

Accepted Answer

According to the Fortinet documentation1, “Split tunneling allows you to specify which traffic is tunneled to the FortiGate and which traffic is sent directly to the
Internet. This can improve performance and reduce bandwidth usage.” Therefore, by configuring split-tunneling in the vap configuration, you can allow the clients
connected to the Corporate SSID to access both the corporate network and the local printer. Option B is incorrect because split-tunneling is configured at the vap
level, not the wtp-profile level. Option C is incorrect because blocking intra-SSID traffic prevents wireless clients on the same SSID from communicating with each
other, which is not related to accessing a local printer. Option D is unnecessary and impractical because the printer does not need to be a wireless client on the
Corporate wireless network to be accessible by the clients.

Question 10

Refer to the exhibits

From SurePassExam
https://www.surepassexam.com/NSE7_LED-7.0-exam-dumps.html (37 New Questions)
The exhibits show the wireless network (VAP) SSID profiles defined on FortiManager and an AP profile assigned to a group of APs that are supported by FortiGate
None of the APs are broadcasting the SSlDs defined by the AP profile
Which changes do you need to make to enable the SSIDs to broadcast?

Accepted Answer

According to the FortiManager Administration Guide1, “To enable the SSID, you must select at least one channel for the radio. If no channels are selected, the
SSID will not be enabled.” Therefore, enabling one channel in the Channels section will allow the SSIDs to broadcast.